[Fold Skew Adjustment]

Adjust the push-in amount of the adjustment plates for the Saddle Stitcher SD-513.

Make this adjustment when the folding line is skewed in [Single Fold] or [Multi Fold].

Tips

• If a numeric value is entered in [Offset for All Size], it is applied to all the paper sizes. If a numeric value is entered for a specific paper size, the setting value becomes the sum of the entered value of the specific paper size and the entered value of [Offset for All Size].

1

Select [Single Fold] or [Multi Fold].

2

Press the selection key of the paper size to adjust.

3

Press [Print Mode].

4

Load the paper of the size to be adjusted into any tray, and select that paper tray.

5

Press Start on the Control panel.

A sample is output.

6

Check for skew of the folding line.

7

If any adjustments are required, press [Exit PrintMode] to return to the setting screen.

8

Use the on-screen keypad to enter the numeric value.

• Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].

• [Adj. Range:-50~+50 1step = 0.1mm]

9

Repeat steps 3 to 8 until the desired result is obtained.