Home >
Adjustment > [Saddle Stitcher Adjustment] (Saddle Stitcher SD-513) > [Staple Tip Adjustment]
[Staple Tip Adjustment]
Overview
Change the staple pitch on the Saddle Stitcher SD-513, and adjust the staple tip form.
Make this adjustment when staple tips protrude.
Setting Procedure
2
Load A3 w or 11 e 17 w paper into any paper tray, and select that paper tray.
3
Press Start on the Control panel.
A sample is output.
4
Check the shape of the staple tip.
5
If any adjustments are required, press [Exit PrintMode] to return to the setting screen.
6
Use the on-screen keypad to enter the numeric value.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-9~+9 1step = 1msec]
7
Repeat steps 1 to 6 until the desired result is obtained.