Adjust the crease position of the perfect binding cover in Creaser Unit CR-101 mounted on Saddle Stitcher SD-513.
The crease position of the perfect binding cover is controlled so that the reference position is set to suit the width of the spine width of perfect binding. Make this adjustment when the distance from the paper edge to the crease position deviates from the standard value at both the 1st crease position and the 2nd crease position.
All the following options are required to use this function.
A sample is output.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-20~+20 1step = 0.1mm]
Adjust the length from the paper edge on the left of the top face of the perfect binding cover to the 1st crease position.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-20~+20 1step = 0.1mm]
Adjust the length from the paper edge on the left of the top face of the perfect binding cover to the 2nd crease position.