[Staple Offset Adjustment]

Adjust the position when stapling on the Saddle Stitcher SD-513.

You can reduce the misalignment between the folding line and staple positions.

1

Press [Print Mode].

2

Load A3 w or 11 e 17 w paper into any paper tray, and select that paper tray.

3

Press Start on the Control panel.

A sample is output.

4

Check the misalignment of "a" between the folding line and staple positions.

• Standard value: a = -1.0 mm to +1.0 mm

5

If any adjustments are required, press [Exit PrintMode] to return to the setting screen.

6

Use the on-screen keypad to enter the numeric value.

• Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].

• [Adj. Range:-10~+10 1step = 0.1mm]

7

Repeat steps 1 to 6 until the desired result is obtained.