[Density Balance Auto. Adj.]
Overview
Perform [Density Balance Auto. Adj.].
The density unevenness in the main scanning direction can be adjusted by outputting a density balance chart and measuring using various devices.
The operation screen varies depending on the mounted optional devices.
NOTICE
- When a scanner and HDD are unmounted, this function is not available. Perform [Density Balance Adjustment]. For details, refer to [Density Balance Adjustment].
Setting Items (With Intelligent Quality Care Unit IQ-501 Mounted)
NOTICE
- The optional Intelligent Quality Care Unit IQ-501 is required to use this function.
Reference
- For details about the adjustment procedure, refer to [Adjustment / Maintenance].
Setting item | Description |
|---|---|
Adjustment value profile list | Displays a list of adjustment value profiles. |
[Enable] / [Disable] | Each time this item is pressed, [Enable] and [Disable] are switched. |
[Print Mode] | Outputs a chart for measurement. |
Setting Items (With Intelligent Quality Care Unit IQ-501 Unmounted and Scanner Equipped)
Reference
- For details about the adjustment procedure, refer to [Adjustment / Maintenance].
Setting item | Description |
|---|---|
[Output Chart] | Outputs a chart for [Density Balance Auto. Adj.]. |
[Start] | Starts scanning the output chart. |
[Adjustment Data List] | Displays a list of adjustment values registered with [Density Balance Auto. Adj.]. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.