HomeDescriptions of Functions / Utility KeysCard Shot

Card Shot

To display:
  • [Copy]
    • [Application]
      • [Others]
        • [Card Shot]

When you want to copy cards, you can arrange the front and back sides of the card on the same side of a single page and print them onto one sheet.

Settings

Description

[ON]/[OFF]

Select [ON] to specify Card Shot.

[Original Size]

Specify the size of the card to copy by tapping [+]/[-] for the inch area, by tapping [+]/[-] or Keypad for the centimeter area. To display the Keypad, tap the input area for the numeral. From the [Registered Paper Size], you can recall a size previously stored and specify the size.

[Layout]

Select the layout for arranging the front side and back side of the card on the paper from [Top/Bottom], [Left/Right (Top Half)], and [Left/Right].

[Zoom]

Select a zoom ratio for copying.

  • [Full Size]: Copy by enlarging according to the paper size.

  • [x1.0]: Copy with the same size as the card.

  • For details about the operation procedure of [Card Shot], refer to Here.

  • A card size can be registered, and the default [Layout] and [Zoom] values can be changed. For details, refer to Here.