HomeDescriptions of Functions / Utility KeysF-Code TX

F-Code TX

To display:
  • [Scan/Fax]
    • [Application]
      • [Fax Setting]
        • [F-Code TX]

To use Confidential TX or Relay Distribution, enter an F code (SUB address and sender ID) and send it.

F code is a communication procedure that is standardized by CIAJ (Communications and Information Network Association of Japan). Confidential TX and Relay Distribution are available if a remote machine supports F-code communications.

Settings

Description

[ON]/[OFF]

Select [ON] to specify F-Code TX.

[SUB Address]

Enter a SUB address. Tap the input area for the numeral to display the Keypad.

  • To use Confidential TX, enter the Confidential User Box number programmed for the destination.

  • To use relay distribution, enter the Relay User Box number programmed for the destination.

[Sender ID]

Enter a sender ID. Tap the input area for the numeral to display the Keypad.

  • To use Confidential TX, enter the communication password for Confidential RX that is programmed for the destination.

  • To use relay distribution, enter the Relay User Box password programmed for the destination.