HomeDescriptions of Functions / Utility KeysFTP TX Settings

FTP TX Settings

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [FTP Settings]
          • [FTP TX Settings]

Configure settings to enable use of the FTP transmission function on this machine.

Settings

Description

[ON]/[OFF]

Select whether to use the FTP transmission function of this machine.

Selecting this option sends the scanned original data to the FTP server.

[ON] is specified by default.

[Proxy Server Address]

To access to the FTP server via a proxy server, enter the proxy server address.

Use one of the following entry formats.

  • Example of host name entry: "host.example.com"

  • Example of IP address (IPv4) entry: "192.168.1.1"

  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[Proxy Server Port Number]

If necessary, change the proxy server port number.

Normally, you can use the original port number.

[21] is specified by default.

[Port No.]

If necessary, change the FTP server port number.

Normally, you can use the original port number.

[21] is specified by default.

[Connection Timeout]

If necessary, change the time-out time to limit a communication with the FTP server.

[60 sec.] is specified by default.