HomeDescriptions of Functions / Utility KeysSMB Settings

SMB Settings

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [SMB Settings]

Set the SMB (Server Message Block) operating environment.

Settings

Description

[Client Settings]

Configure settings to enable use of the SMB client function of this machine.

For details, refer to Here.

[SMB Server Settings]

Configure the settings to operate this machine as the SMB server.

Specify the SMB protocol to be supported, or configure the setting for SMB printing or SMB file sharing.

For details, refer to Here.

[WINS/NetBIOS Settings]

Register the WINS server when it is installed to resolve the name.

For details, refer to Here.

[Direct Hosting Setting]

Select whether to enable the direct hosting SMB service. If enabled, a peer can be specified using the IP address (IPv4 or IPv6) or host name.

For details, refer to Here.