Original Settings

[Original Setting]

Set the options to scan originals correctly based on their properties.

• [Mixed Original]: Even for an original with pages of different sizes, by using the ADF, you can scan data while detecting the size of each page. For details, refer to Here.

• [Thin Paper Original]: Reduces the transport speed of the original on the ADF to prevent the original from being caught when scanning an original that is thinner than plain paper. For details, refer to Here.

• [Z-Folded Original]: Even the original sizes of folded originals can be detected accurately. For details, refer to Here.

• [Booklet Original]: Scan a catalog with the staples removed as a 2-sided original, make a 2-sided copy, and staple the center of the paper in the same manner as the original catalog. For details, refer to Here.

[Despeckle]

Scan an original using the ADF while removing dust from the Slit Scan Glass.

For details, refer to Here.

[Blank Page Removal]

Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.

For details, refer to Here.

[Binding Position]

When scanning a 2-sided original, select the original binding position to prevent the binding positions be reversed between the front and rear faces.

For details, refer to Here.

[Original Size]

If the size of the original is not detected correctly, select a key indicating the size of the original to be scanned.

For details, refer to Here.

[Original Direction]

Specify the orientation of the loaded original.

For details, refer to Here.