HomeDescriptions of Functions / Utility KeysExpert Adjustment

Expert Adjustment

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]

Specify this setting if the color tone of print image, staple, hole-punch, and folding positions are changed. You can adjust various settings such as correction of printed image, adjustment of staple, hole-punch, and folding positions.

Settings

Description

[AE Level Adjustment]

Adjust the AE (Auto Exposure) level.

For details, refer to Here.

[Printer Adjustment]

Adjust the print start position and defective print images.

For details, refer to Here.

[Finisher Adjustment]

Adjust the staple, punch or fold position.

For details, refer to Here.

[Density Adjustment]

Adjust the density of images that are printed on thick paper, OHP transparencies, or envelops for each paper type and print color.

For details, refer to Here.

[Image Stabilization]

Correct the misalignment or tilt of scanning area caused by changes in the temperature or humidity in the machine to ensure high quality printing.

For details, refer to Here.

[Paper Separation Adjustment]

Adjust the paper separation position on each side of paper for 2-sided printing.

For details, refer to Here.

[Color Registration Adjust]

Adjust the print position with respect to each color if color shifts are detected in the print result.

For details, refer to Here.

[Gradation Adjustment]

Adjust gradation when reproduction quality of the printed image is degraded.

For details, refer to Here.

[Scanner Area]

Adjust the scan range of the scanner. For details, contact your service representative.

[ADF Adjustment]

Make adjustments for scanning images in the ADF. For details, contact your service representative.

[Line Detection]

Set this option for the dirt detection level for the Slit Scan Glass and cleaning of the Slit Scan Glass.

For details, refer to Here.

[Trail Edge Adjust]

Correct the color misalignment if the trailing edge of the printed image is out of alignment.

For details, refer to Here.

[User Paper Settings]

Register special paper with [User Paper 1] through [User Paper 6]. Settings to configure include Basic Weight and Media Adjustment. For details on displaying this item, contact your service representative.

[Erase Adjustment]

Specify the operation and erase method when erasing the area outside the original by setting [Non-Image Area Erase].

For details, refer to Here.

[PS Designer Settings]

Specify whether to reproduce the colors in the original strictly as they are when printing it using a PS driver from your computer.

For details, refer to Here.