HomeDescriptions of Functions / Utility KeysMedia Adjustment

Media Adjustment

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Printer Adjustment]
            • [Media Adjustment]

Adjust print defects (voids, white spots, roughness) that are caused by paper properties for each paper type.

Copy or print after configuration, then repeat adjustments as required.

Settings

Description

[Front]/[Back]

Select the side of paper subject to defect adjustment depending on the resolution.

  • [Front]: Select this option if defective images are found on the front side of 1-sided or 2-sided printing.

  • [Back]: Select this option if defective images are found on the back side of 2-sided printing.

[Paper Type]

Select the type of paper that is used to adjust defects.

[Adjust Value]

Enter an adjustment value between -8 and +7 by tapping [-] and [+].

  • [-]: Tap this button if a print image has voids or white spots.

  • [+]: Tap this button if the surface of the print image is rough.

[Auto] is specified by default.