HomeDescriptions of Functions / Utility KeysTrail Edge Adjust

Trail Edge Adjust

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Trail Edge Adjust]

Correct the color misalignment if the trailing edge of the printed image is out of alignment.

Load paper into the Bypass Tray and press Start to start printing the test pattern. Make adjustments while checking the test pattern.

Select the appropriate paper type, and then enter an adjustment value between -5 and +5 dots by tapping [-] and [+].

[0] is specified by default.