HTTP Server Settings

[ON]/[OFF]

Select whether to use this machine as an HTTP server.

[ON] is specified by default.

[PSWC Settings]

Select whether to use Web Connection.

[ON] is specified by default.

[IPP Settings]

Select whether to use IPP.

[ON] is specified by default.

[Accept IPP Jobs]

Select whether to use IPP printing.

[ON] is specified by default.

[Support Information]

Select whether to allow the following IPP operations.

• [Print Job]: Allows a print job.

• [Valid Job]: Allows you to check a valid job.

• [Cancel Job]: Allows you to cancel a job.

• [Open Job Attributes]: Allows you to obtain job attributes.

• [Open Job]: Allows you to obtain a list of job attributes.

• [Open Printer Attributes]: Allows you to obtain printer attributes.

[ON] (Allow) is specified by default.

[Printer Information]

If necessary, enter the printer information of this machine.

• [Printer Name]: Enter the printer name of this machine (using up to 127 characters).

• [Printer Location]: Enter the location where to install this machine (using up to 127 characters).

• [Printer Information]: Enter printer information of this machine (using up to 127 characters).

• [Print URI]: Displays the URI of the printers that can print data using the IPP.

[IPP Authentication Settings]

Select whether to use the IPP authentication.

[ON] is specified by default.

[General Settings]

Select the IPP authentication method.

[requesting-user-name] is specified by default.

[User Name]

Enter a user name (using up to 20 characters).

This entry is required if you have selected [basic] or [digest] for [General Settings].

[Password]

Enter the password of the user specified in [User Name].

This entry is required if you have selected [basic] or [digest] for [General Settings].

[realm]

If [digest] is selected for [General Settings], enter the domain (realm) (using up to 127 characters).