HomeDescriptions of Functions / Utility KeysLine Parameter Setting

Line Parameter Setting

To display:
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [Line Parameter Setting]

Configure the environment to use fax functions on this machine, such as the types of telephone lines (dialing method) and fax receive mode.

Settings

Description

[Dialing Method]

Select the line type according to your environment.

For details, refer to Here.

[Receive Mode]

Select a receive mode.

For details, refer to Here.

[Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax.

For details, refer to Here.

[Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after the elapse of a certain period of time. If necessary, change the number of redials.

For details, refer to Here.

[Redial Interval]

If necessary, change the redial intervals when you specified a value in [Number of Redials].

For details, refer to Here.

[Line Monitor Sound]

Select whether to play sounds on the telephone line from speakers during fax communication.

For details, refer to Here.

[Line Monitor Sound Volume (Send)]

Monitors sounds output from the machine. Specify the monitor sound volume between 0 and 31.

For details, refer to Here.

[Line Monitor Sound Volume (Receive)]

Monitors sounds output from the recipient, including switching equipment or TA. Specify the monitor sound volume between 0 and 31.

For details, refer to Here.