Copier Settings

[Auto Booklet Selection for Saddle Stitching]

When you have specified [Center Staple & Fold] or [Half-Fold], select whether to specify [Booklet] automatically.

For details, refer to Here.

[Auto Zoom for Combine/Booklet]

Select whether to adjust the image automatically to optimal zoom ratio when you specify [Combine] or [Booklet] and select [Auto] for [Paper].

For details, refer to Here.

[Booklet Short Cut Mode]

Select whether to automatically set the Booklet function to [ON] when the setting screen for [Booklet] is displayed.

For details, refer to Here.

[Default Copy Settings]

Change the default settings (settings when the power is turned on, or the Reset is pressed) in the copy mode.

For details, refer to Here.

[Default Enlarge Display Settings]

Change the default settings (settings when the power is turned on, or the Reset is pressed) in the copy mode, in the enlarge display mode.

For details, refer to Here.

[When AMS Direction is Incorrect]

When you have selected [Auto] in [Zoom], select whether to print the original even if the original loading direction is different from the paper direction.

For details, refer to Here.

[Separate Scan Output Method]

Select the timing that the machine starts printing when scanning an original by specifying [Separate Scan].

For details, refer to Here.

[Enlargement Rotation]

If you are copying an original in portrait orientation by enlarging it, and the lengthwise size of the original after it is enlarged exceeds 11-11/16 inches (297 mm), select whether to automatically rotate the image.

For details, refer to Here.

[Auto Zoom (Platen)]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to Here.

[Auto Zoom (ADF)]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to Here.

[Specify Default Tray when APS Off]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to Here.

[Select Tray for Insert Sheet]

Configure the default paper tray loaded with paper when the [Cover Sheet], [Insert Sheet], or [Chapters] is set.

For details, refer to Here.

[Tri-Fold Print Side]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to Here.

[Print Jobs During Copy Operation]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to Here.

[Automatic Image Rotation]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to Here.

[Finishing Program]

Select whether to display finishing program keys in the main screen of the copy mode.

For details, refer to Here.

[Card Shot Settings]

Specify the default setting of [Card Shot] in [Application], and register the original size. With [Card Shot], the registered size can be invoked.

For details, refer to Here.