HomeDescriptions of Functions / Utility KeysNetWare Print Settings

NetWare Print Settings

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [NetWare Settings]
          • [NetWare Print Settings]

Configure the NetWare printing environment.

Settings

Description

[ON]/[OFF]

‏Select whether to enable NetWare printing.

[OFF] is specified by default.

[NetWare Print Mode]

Select an operation mode of the print server according to your environment.

[PServer] is specified by default.

[PServer]

Tap [PServer] to configure settings for using this machine as PServer.

  • [Print Server Name]: Enter the print server name (using up to 63 characters).

  • [Print Server Password]: If necessary, enter a print server password (using up to 63 characters).

  • [Polling Interval]: Specify a job inquiry interval. [1] sec. is specified by default.

  • [NDS/Bindery Setting]: Select [NDS] or [NDS & Bindery]. [NDS] is specified by default.

  • [File Server Name]: Enter the priority file server name to be used in the Bindery emulation mode (using up to 47 characters).

  • [NDS Context Name]: Enter the context name of the NDS to be connected via the print server (using up to 191 characters).

  • [NDS Tree Name]: Enter the tree name of the NDS to be connected via the print server (using up to 63 characters).

[Nprinter/Rprinter]

Tap [Nprinter/Rprinter] to configure settings for using this machine as Nprinter or Rprinter.

  • [Print Server Name]: Enter the print server name (using up to 63 characters).

  • [Printer Number]: Enter the printer number.

[Status]

Allows you to check the server name, queue name, or queue status.