HomeDescriptions of Functions / Utility KeysStatus Notification Setting

Status Notification Setting

To display:

[Utility]
- [Administrator Settings]
  - [Network Settings]
    - [Detail Settings]
      - [Status Notification Setting]

Configure the setting for notifying to the registered E-mail address when a warning such as for toner replacement or a paper jam occurs on this machine.

Settings		Description
[Register Notification Address]		Register an address where to notify a warning that occurred on this machine.
	[IP Address 1] to [IP Address 5]	Select this item when specifying a notification destination with an IP address or host name. [Address]: Enter the address of the destination in any of the following formats. Example of host name entry: "host.example.com" Example of IP address (IPv4) entry: "192.168.1.1''" Example of IP address (IPv6) entry: "fe80::220:6b.:fe10:2f16" [Port Number]: If necessary, change the port number. [162] is specified by default. [Community Name]: Enter the community name (using up to 15 characters). [public] is specified by default. [Notification Items]: Select an item to be notified automatically. Set an item to be notified to [ON].
	[IPX Address]	Select this item when specifying a notification destination with an IPX address. [Address]: Enter the network address and node address of the destination. [Network Address]: Enter the network address using eight hexadecimal characters. [Node Address]: Enter the node address using 12 hexadecimal characters. [Community Name]: Enter the community name (using up to 15 characters). [public] is specified by default. [Notification Items]: Select an item to be notified automatically. Set an item to be notified to [ON].
	[E-mail 1] to [E-mail 10]	Select this item when specifying a notification destination with an E-mail address. [Edit E-Mail Address]: Enter the destination E-mail address. [Notification Items]: Select an item to be notified automatically. Set an item to be notified to [ON].