Function ON/OFF Setting

[F-Code TX]

Select whether to use F-Code TX.

F-Code TX is a function that sends documents to a destination by entering a SUB address and a sender ID (communication password) of a specific user box. The remote machine must support the F-Code TX/RX.

For details, refer to Here.

[Relay RX]

Select whether to use this machine as a fax relaying station.

If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and automatically relay it to multiple programmed destinations.

For details, refer to Here.

[Relay Printing]

Select whether to distribute and print a received fax when this machine is used as a fax relaying station.

For details, refer to Here.

[Destination Check Display Function]

Select whether to show a list of specified destinations before sending a fax.

For details, refer to Here.

[Confirm Address (TX)]

Select whether to require the user to enter a fax number twice to send a fax by directly entering the fax number.

For details, refer to Here.

[Confirm Address (Register)]

Select whether to require the user enter a fax number twice to register it when, for example, registering a destination or forwarding destination.

For details, refer to Here.

[PIN Code Display Mask Function]

Configure a setting to prevent display of the PIN code in a fax report or job history when adding a personal ID (PIN code) to a fax number in order to send a fax.

For details, refer to Here.