Set the discharging voltage for each of Y, M, C, and K of the 1st transfer belt in order to measure each current value of AC/DC of the 1st transfer discharged electric pole.
Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.
Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Expert Adjustment], [Process Adjustment], and [1st Trans. Dis-elec. Output] in sequence.
Select the desired conditions for Y, M, C, and K, respectively.
Press [OK] to complete the setting.
To cancel the change, press [Cancel]. In either case, the screen returns to the [Process Adjustment Menu] screen.