Home Settings and AdjustmentsRegistering a Group as a Destination

Registering a Group as a Destination

Register destinations as a group.

  • You can register up to 100 groups.

  • You can register up to 50 destinations in one group.

  • You can register more than one destination in one group for E-mail. You can register only one destination in one group for each of HDD, FTP, SMB, and WebDAV.

  • You cannot register a destination for USB flash drive.

  1. Follow the procedure on Scan Address Register to display the [Scan Address Register Menu] screen.

  2. Press [Address Edit].

    The [Scan Address Register] screen is displayed.

  3. Press [Group].

  4. Press [Add].

  5. Press [Group Name], and then enter a group name on the [Group Name] screen.

    [Group Name]

    Enter a name of a group.

    If you register the name, it is displayed on the destination list.

    You can enter up to 24 one-byte characters (12 two-byte characters).

  6. Press destinations to select.

    • Pressing [E-mail], [HDD], [FTP], [SMB] or [WebDAV] displays destinations registered for each option.

    • If destinations cannot be displayed on one page, press [] or [] to switch between pages.

    • You can register up to 50 destinations in one group. You can register more than one destination in one group for E-mail. You can register only one destination in one group for each of HDD, FTP, SMB, and WebDAV.

  7. Press [List].

    The selected destinations are displayed in a list.

  8. Check that the registered content is correct, and then press [OK].

  9. Check that the registration is completed.