Detect Orig. Size on Glass: Setting the Original Size Detection for When Original Glass is Used

Specify the size system of the original to be detected on the original glass.

Table 1: A and B paper are detected.

Table 2: A, B, and inch paper are detected.

1. Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.

2. Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Size Setting] and [Detect Org. Size on Glass] in sequence.

3. Select [Table1] or [Table2].

4. Press [OK] to complete the setting.

   • To cancel the change, press [Cancel].

   In either case, the screen returns to the [Size Setting Menu] screen.