The following features can be provided by switching the selection. This setting can also be performed by selecting [Common Setting] from the User Setting.
Menu item | Description | Setting options (with default bolded) |
---|---|---|
[One Shot Message Indication Time] | Select the time span to display a shot message, such as [Original size is A4], in the message area of the touch panel. | 3 seconds, 5 seconds |
[Offset by Job Unit] | Specify whether or not to offset the output sheets by job. | ON, OFF Also specify the number of jobs to be offset when selecting ON for this function (default: 1). |
[Continuation Print] | Specify whether or not to output multiple reserve jobs in succession without stopping the machine at a job break. | Copy ON, Copy OFF, Printer ON, Printer OFF |
[Stop Button Function] | Specify whether to pause or abort a job when Stop is pressed on the control panel. | Job Temp. Stop, Job Stop |
[Back Side Magnification Adjustment] | Specify whether to enable the lens adjustment mode. | ON, OFF |
[Fusing Stability] (On switching the trays) | Select what to prioritize when fusing. | Best Quality, Better Quality, Speed |
[Prior Paper Type] | Specify the temperature setting of the fusing section on standby. It can shorten the waiting time before printing by selecting a frequently used paper. | Others, Coated |
[Dash Length (Page Stamp)] | Select the length of the dash to be used in a style of [Page] in [Stamp]. | Long, Short |
[Center Crop Mark Trim Margin] | Specify the space between the center crop mark and image area (center crop mark trim margin). | 0.0 to 20.0 mm (default: 1.0) |
[Schedule Cross Axis Unit (Default)] | Select the unit of horizontal axis on the [Schedule] screen. | Timetable, Time Frame (m), Sheet Volume |
[Hold Job Status after Output (Default)] | Select the default value to delete or save the data of hold job after outputting. | Delete, Save |
[Destination for HDD Recall (Default)] | Select the default destination for the job data recalled from the HDD. | Print, Hold, Print&Hold, |
[Offset Output Mode] | Specify how to offset the output sets. | Change Out Pos., Partition Paper (Tray 1 to Tray 9, PI 1, PI 2), Stop Print |
[Needless Tab Paper Exit] | Specify whether or not to automatically discharge the oddments of tabbed sheets loaded in a tray as a set for copy job. | ON, OFF |
[Remaining Memory (Measurement Unit)] | Select the unit of displaying the remaining memory. | %, GB |
[Remaining Memory (Warning)] | Select the percentage at which to give warning when the remaining memory is low. | 5 % or Less, 10% or Less |
The [Dash Length(Page Stamp)] setting is enabled when Image Controller IC-602 is mounted.
[Schedule Cross Axis Unit (Default)] is displayed when Image Controller IC-602 is mounted.
Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.
Press Common Setting on the [Administrator Setting Menu] screen.
The [Common Setting] screen is displayed.
For subsequent operations, follow the same procedure as that in [User Setting] - [Common Setting]. Refer to Common Setting: Setting the Various Operations of the Machine for details.