If the message [Setting will be reflected after the main power turned off/on] is displayed after any setting change in the Controller NIC Setting, turn the main power switch of the machine off and then back on.
Set network information for Image Controller IC-602 here. For details about network information for Image Controller IC-310 or Image Controller 308, refer to the Image Controller IC-310 or Image Controller IC-308 user's guide.
Menu Item/Description | Setting Items/Options (with default bolded) | |||||
---|---|---|---|---|---|---|
01 TCP/IP Setting (Setup of IP address, DNS, IPsec, etc. ) | ||||||
TCP/IP Setting | Enable, Disable | |||||
IP Address Setting Method *1 | Auto Setting, Manual Setting | |||||
Auto Setting | ||||||
DHCP Setting | Enable, Disable | |||||
BOOTP Setting | Enable, Disable | |||||
ARP/PING Setting | Enable, Disable | |||||
AUTO IP Setting | Enable, Disable | |||||
Direct Setting | ||||||
IP Address | 0.0.0.0 (0 to 255) | |||||
Subnet Mask | 0.0.0.0 (0 to 255) | |||||
Default Gateway | 0.0.0.0 (0 to 255) | |||||
IPv6 Setting | ||||||
IPv6 Setting | Enable, Disable*2 | |||||
IPv6 Auto Setting | Enable, Disable*3 | |||||
IPv6 DHCP Setting | Enable, Disable | |||||
Global Address | 0000:0000:0000:0000:0000: 0000:0000:0000 (1 to 39 bytes)*4 | |||||
Prefix Length | 1 to 128 (0) | |||||
Link Local Address | fe80: XXXX*5 | |||||
Gateway Address | 0000:0000:0000:0000:0000: 0000:0000:0000 (1 to 39 bytes)*6 | |||||
DNS Server Setting | ||||||
DNS Server Setting (IPv4) | ||||||
DNS Server Auto Setting | Enable, Disable | |||||
Primary DNS Server | 0.0.0.0 (0 to 255) | |||||
Secondary DNS Server 1 | 0.0.0.0 (0 to 255) | |||||
Secondary DNS Server 2 | 0.0.0.0 (0 to 255) | |||||
DNS Server Setting (IPv6) | ||||||
DNS Server Auto Setting | Enable, Disable | |||||
Primary DNS Server | 0000:0000:0000:0000:0000:0000: 0000:0000 (1 to 39 bytes) | |||||
Secondary DNS Server 1 | 0000:0000:0000:0000:0000:0000: 0000:0000 (1 to 39 bytes) | |||||
Secondary DNS Server 2 | 0000:0000:0000:0000:0000:0000: 0000:0000 (1 to 39 bytes) | |||||
Dynamic DNS Setting | Enable, Disable | |||||
Host Name | KM + last 6 digits of MAC Up to 63 one-byte characters can be used. | |||||
LLMNR Setting | Enable, Disable | |||||
DNS Domain Name Setting | ||||||
DNS Domain Auto Obtain | Enable, Disable | |||||
DNS Search Domain Name Auto | Enable, Disable | |||||
DNS Default Domain Name | Up to 251 one-byte characters can be used. *8 | |||||
DNS Search Domain Name 1 | Up to 251 one-byte characters can be used. *8 | |||||
DNS Search Domain Name 2 | Up to 251 one-byte characters can be used. *8 | |||||
DNS Search Domain Name 3 | Up to 251 one-byte characters can be used. *8 | |||||
RAW port | ||||||
RAW1 Port | 1 to 65535 (9100) Enable, Disable*9 | |||||
RAW2 Port | 1 to 65535 (9112) Enable, Disable*9 | |||||
RAW3 Port | 1 to 65535 (9113) Enable, Disable*9 | |||||
RAW4 Port | 1 to 65535 (9114) Enable, Disable*9 | |||||
RAW5 Port | 1 to 65535 (9115) Enable, Disable*9 | |||||
RAW6 Port | 1 to 65535 (9116) Enable, Disable*9 | |||||
IP Filtering | ||||||
Permission Setting | Enable, Disable Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)*10 Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) | |||||
Denial Setting | Enable, Disable Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)*10 Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) | |||||
IPsec Setting | Permit, Prohibit | |||||
IKE Setting / IKEv1 |
| |||||
Encryption Algorithm | DES-CBC, 3DES-CBC, AES-CBC | |||||
AES-CBC Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
Authentication Algorithm | MD5, SHA-1, SHA-2 | |||||
SHA-2 Key Length | 256, 384, 512, 256 and 384, 384 and 512, All | |||||
Key Valid Time | 600 to 604800 (28800) (sec.) | |||||
Diffie-Hellman Group | Group 1, Group 2, Group 5, Group 14 | |||||
IKEv1 Negotiation Mode | Main Mode, Aggressive Mode | |||||
IKE Setting / IKEv2 | ||||||
Encryption Algorithm | DES-CBC, 3DES-CBC, AES-CBC | |||||
AES-CBC Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
Authentication Algorithm | MD5, SHA-1, SHA-2, AES-XCBC | |||||
SHA-2 Key Length | 256, 384, 512, 256 and 384, 384 and 512, All | |||||
Key Valid Time | 600 to 604800 (28800) | |||||
Differ-Hellman Group |
| |||||
Priority 1 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
Priority 2 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
Priority 3 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
Priority 4 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
IPsec Setting/IPsec SA Setting | Up to 10 groups can be set. | |||||
Group 1 to Group 10 | Up to 10 one-byte characters can be used. | |||||
SA Setting | Use, Not Use | |||||
Encapsulation Mode | Tunnel Mode, Transport | |||||
Security Protocol | AH, ESP | |||||
Key Exchange Method | IKEv1, IKEv2, Manual Key | |||||
Authentication Method | Pre-Shared Key, Digital Signature | |||||
ESN | Enable, Disable | |||||
Relay Detection | Enable, Disable | |||||
ESP Encryption Algorithm | DES-CBC, 3DES-CBC, AES-CBC, AES-CTR, AES-GCM, AES-GCS-64, | |||||
AES-CBC Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
AES-CTR Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
AES-GCM Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
AES-GCM-64 Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
ENC-NULL-AES-GMAC Key Len | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
ESP Auth. Algorithm | MD5, SHA-1, SHA-2, AES-XCBC | |||||
SHA-2 Key Length | 256, 384, 512, 256 and 384, 384 and 512, All | |||||
AH Auth. Algorithm | MD5, SHA-1, SHA-2, AES-GMAC, AES-XCBC | |||||
SHA-2 Key Length | 256, 384, 512, 256 and 384, 384 and 512, All | |||||
AES-GMAC Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||
Destroy Time after Setup | ||||||
Destroy Time after Setup | 600 to 604800 (3600) (sec.) | |||||
Perfect Forward Secrecy | Use, Not Use | |||||
Diffie-Hellman Group |
| |||||
IKEv1 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
IKEv2 |
| |||||
Priority 1 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
Priority 2 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
Priority 3 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
Priority 4 | Group 1, Group 2, Group 5, Group 14, OFF | |||||
Encryption Algorithm | DES-CBC, 3DES-CBC, AES-CBC, NULL | |||||
AES-CBC Key Length | 128, 192, 256 | |||||
Authentication Algorithm | MD5, SHA-1, SHA-2, AES-XCBC, NONE | |||||
SHA-2 Key Length | 256, 384, 512 | |||||
SA Index | ||||||
Receive | 256 to 4294967295 | |||||
Send | 256 to 4294967295 | |||||
Common Keys for Enc. | ||||||
Receive | ||||||
Send | ||||||
Common Keys for Auth. | ||||||
Receive | ||||||
Send | ||||||
IPsec Setting/Peer | Up to 10 groups can be set. | |||||
Group 1 to Group 10 | Up to 10 one-byte characters can be used. | |||||
Set IP Address | ||||||
Set IP Address | Single Address, Subnet Settings, Set Range | |||||
Single Address | IPv4 Change, IPv6 Change | |||||
Subnet Settings | IP Address: IPv4 Change, IPv6 Change Subnet Mask: IPv4 Change, IPv6 Change | |||||
Set Range | Start: IPv4 Change, IPv6 Change End: IPv4 Change, IPv6 Change | |||||
Pre-Shared Key | Up to 128 one-byte characters can be used. | |||||
Key-ID | Up to 128 one-byte characters can be used. | |||||
IPsec Setting/Protocol Settings | Up to 10 groups can be set. | |||||
Name | Up to 10 one-byte characters can be used. | |||||
Identification Protocol | Unspecified, TCP, UDP, ICMP, ICMPv6 | |||||
Port Number | Port Number, Set Range | |||||
Port Number | From/Start: 1 to 65535 Destination/End: 1 to 65535 | |||||
Set Range | From/Start: 1 to 65535 From/End: 1 to 65535 Destination/Start: 1 to 65535 Destination/End: 1 to 65535 | |||||
IPsec Setting/IPsec Policy | Up to 10 groups can be set. | |||||
Name | Up to 10 one-byte characters can be used. | |||||
Peer | 1 to 10 keys | |||||
Protocol Setting | 1 to 10 keys | |||||
IPsec Setting | 1 to 10 keys | |||||
Direction | Both, Send, Receive | |||||
Action | Protected, Allow, Deny, Cancel | |||||
Dead Peer Detection | 15, 30, 45, 60, 75, 105, 120 | |||||
Cookie | Enable, Disable | |||||
ICMP Pass | Enable, Disable | |||||
ICMPv6 Pass | Enable, Disable | |||||
Default Action | Allow, Deny | |||||
IPsec Setting/Check Connection | ||||||
PING Confirmation | ||||||
Ping Send Address | IPv4 Change, IPv6 Change | |||||
Check Connection | Start | |||||
Communication Error Log | ||||||
02 NetWare Set | ||||||
<Netware Set> | ||||||
IPX Setting | Enable, Disable | |||||
Ethernet Frame Type | Auto Detect, 802.2, 802.3, Ethernet II, 802.3SNAP | |||||
NetWare Print Mode | Disable, Pserver, Nprinter, Rprinter | |||||
Nprinter/Rprinter Set | ||||||
Print Server Name | KM + last 6 digits of MAC Address Up to 63 one-byte characters can be used. | |||||
Printer Number | 0 to 255 (255) | |||||
Pserver Setting | ||||||
Print Server Name | KM + last 6 digits of MAC Address Up to 63 one-byte characters can be used. | |||||
Print Server Password | Up to 63 one-byte characters can be used. | |||||
Polling Interval | 1 to 65535 (1) (sec.) | |||||
Bindery/NDS Setting | NDS, Bindery/NDS | |||||
File Server Name | Up to 47 one-byte characters can be used. | |||||
NDS Context Name | Up to 191 one-byte characters can be used. | |||||
NDS Tree Name | Up to 63 one-byte characters can be used. | |||||
Status | ||||||
Server Name, Queue Name | ||||||
03 HTTP Server Setting | ||||||
<HTTP Server Setting> | ||||||
HTTP Server Setting | Enable, Disable | |||||
PSWC Setting | Enable, Disable | |||||
IPP Setting | ||||||
IPP Setting | Enable, Disable | |||||
IPP Job Accept | Enable, Disable | |||||
<HTTP Server Setting/IPP Setting> | ||||||
Operation Support Number | ||||||
Print Job | Enable, Disable*9 | |||||
Valid Job | Enable, Disable*9 | |||||
Cancel Job | Enable, Disable*9 | |||||
Open Job Attributes | Enable, Disable*9 | |||||
Open Job | Enable, Disable*9 | |||||
Open Printer Attributes | Enable, Disable*9 | |||||
Printer Information | ||||||
Printer Name | Up to 127 one-byte characters can be used. | |||||
Printer Location | Up to 127 one-byte characters can be used. | |||||
Printer Information | Up to 127 one-byte characters can be used. | |||||
Printer URI | Unmodifiable | |||||
IPP Auth. Setting | ||||||
IPP Auth. Setting | Enable, Disable | |||||
Authentication Method | Requesting-user-name, basic, digest | |||||
User Name | user Up to 20 one-byte characters can be used. | |||||
Password | pass Up to 20 one-byte characters can be used. | |||||
realm | IPP Up to 127 one-byte characters can be used. | |||||
04 WebDAV Setting | ||||||
<WebDAV Server Setting> | ||||||
WebDAV Server Setting | Enable, Disable | |||||
SSL Setting | Non-SSL Only, SSL Only, SSL/Non-SSL | |||||
Access Right Setting | sysadm | |||||
05 FTP Setting | ||||||
<FTP Setting> | ||||||
FTP Server Setting | Enable, Disable | |||||
FTP Send Setting | ||||||
FTP Send Setting | Enable, Disable | |||||
Proxy Server Address | IPv4 Change, IPv6 Change, Host Name Change IPv4 0.0.0.0 (0 to 255) IPv6 0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes) | |||||
Proxy Server Port Number | 1 to 65535 (21) | |||||
PASV Mode | Enable, Disable | |||||
Connection Time Out Time | 5 to 300 (60) (sec.) | |||||
06 SNMP Setting | ||||||
<SNMP Setting> | ||||||
SNMP Setting | ||||||
SNMP Setting | Enable, Disable | |||||
SNMPv1/v2c (IP) | Enable, Disable*9 | |||||
SNMPv3 (IP) | Enable, Disable*9 | |||||
SNMPv1 (IPX) | Enable, Disable*9 | |||||
UDP Port Number | ||||||
UDP Port Number | 1 to 65535 (161) | |||||
<SNMP Setting/SNMPv1/v2c Setting> | ||||||
Read Community Name Set | ||||||
Read Community Name | public Up to 15 one-byte characters can be used. | |||||
Write Community Name Set | ||||||
Write Permission Setting | Permit/Prohibit*9 | |||||
Write Community Name | private Up to 15 one-byte characters can be used. | |||||
<SNMP Setting/SNMPv3 Setting> | ||||||
Context Name Setting | ||||||
Context Name | Up to 63 one-byte characters can be used. | |||||
Discovery User Name Set | ||||||
Discovery User PermitSet | Permit/Prohibit*9 | |||||
Discovery User Name | public Up to 32 one-byte characters can be used. *11 | |||||
Read User Name Setting | ||||||
Read User Name | Up to 32 one-byte characters can be used. *11 | |||||
Security Level | No Admission, auth-password, auth-password/priv-password | |||||
<SNMP/SNMPv3/Read User Name Setting> | ||||||
Password Setting | ||||||
Read User auth-Password | AuthPassword 8 to 32 one-byte characters can be used. | |||||
Read User priv-Password | PrivPassword 8 to 32 one-byte characters can be used. | |||||
<SNMP/SNMPv3/Write User Name Setting> | ||||||
Write User auth-Password | ||||||
Write User Name | restrict Up to 32 one-byte characters can be used. | |||||
Security Level | No Admission, auth-password, auth-password/priv-password*11 | |||||
Password Setting | ||||||
Write User auth-Password | 8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded) | |||||
Write User priv-Password | 8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded) | |||||
<SNMP Setting/SNMPv3 Setting> | ||||||
Authentication Algorithm | DES, AES-128 | |||||
Authentication Method | MD5, SHA-1 | |||||
SNMP Setting | ||||||
TRAP Permission Setting | Permit, Prohibit | |||||
TRAP set (auth. failure) | Enable, Disable | |||||
07 SMB Setting | ||||||
<SMB Setting> | ||||||
SMB Send Setting | ||||||
SMB Send Setting | Enable, Disable | |||||
NTLM Setting | NTLMv1, NTLMv2, NTLMv1/NTLMv2, Kerberos, Kerb./NTLMv1/v2*7 | |||||
DFS Setting | Enable, Disable | |||||
Publication Service | Enable, Disable | |||||
Default Domain Name | Up to 64 one-byte characters can be used. | |||||
Print Setting | ||||||
Print Setting | Enable, Disable | |||||
NetBIOS Name | KM + last 6 digits of MAC Address Up to 15 one-byte characters can be used. | |||||
Print Service Name | PRESS_C1100, [PRESS_C1085] Up to 12 one-byte characters can be used. | |||||
Work Group | WORKGROUP | |||||
<SMB/WINS Setting> | ||||||
WINS Setting | ||||||
WINS Setting | Permit, Prohibit | |||||
WINS Auto Setting | Permit, Prohibit | |||||
WINS Server Address | ||||||
WINS Server Address 1 | 0.0.0.0 (0 to 255) | |||||
WINS Server Address 2 | 0.0.0.0 (0 to 255) | |||||
Node Type Setting | B Node, P Node, M Node, H Node | |||||
Direct Hosting Setting | Enable, Disable | |||||
08 AppleTalk Setting | ||||||
AppleTalk Setting | ||||||
AppleTalk Setting | Permit, Prohibit | |||||
Printer Name | KM + last 6 digits of MAC Address Up to 31 one-byte characters can be used. | |||||
Zone Name | * Up to 31 one-byte characters can be used. | |||||
Current Zone | Unmodifiable | |||||
09 Bonjour Setting | ||||||
Bonjour Setting | ||||||
Bonjour Setting | Permit, Prohibit | |||||
Bonjour Name | Up to 63 one-byte characters can be used. | |||||
10 E-mail Setting | ||||||
SMTP Setting | ||||||
SMTP Setting | Enable, Disable | |||||
SMTP Server Address | IPv4 Change 0.0.0.0 (0 to 255) IPv6 Change 0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes) Host Name Change Up to 253 one-byte characters can be used. *8 | |||||
SSL Setting | SMTP over SSL, Start TLS, Disable | |||||
Port Number | 1 to 65535 (25) | |||||
Port Number (SSL) | 1 to 65535 (465) | |||||
Connection Time Out Time | 30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.) | |||||
Binary Division | Enable, Disable | |||||
Divided Mail Size | 100 to 15000500) (step: 100) (K byte) | |||||
Server Quantity | 0 to 100 (0) (M byte) Specify "0" to make it unlimited. | |||||
Cert. Verification Level | ||||||
Expiration date | Confirm, Do Not Confirm | |||||
CN | Confirm, Do Not Confirm | |||||
Key Usage | Confirm, Do Not Confirm | |||||
Chain | Confirm, Do Not Confirm | |||||
Revocation Checking | Confirm, Do Not Confirm | |||||
SMTP Setting | ||||||
POP Before SMTP | Enable, Disable (sec.) | |||||
Auth | ||||||
SMTP Authentication | Enable, Disable | |||||
POP Before SMTP Time | ||||||
POP Before SMTP Time | 0 to 60 (0) | |||||
SMTP Auth. Setting | ||||||
User ID | Up to 255 one-byte characters can be used. | |||||
Password | Up to 128 one-byte characters can be used. | |||||
realm | Up to 255 one-byte characters can be used. | |||||
POP Setting | ||||||
POP Server Address | IPv4 0.0.0.0 (0 to 255) IPv6 0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes) Host Name Up to 253 one-byte characters can be used. *8 | |||||
Login Name | Up to 63 one-byte characters can be used. | |||||
Password | Up to 15 one-byte characters can be used. | |||||
APOP Authentication | Enable, Disable | |||||
SSL Setting | Enable, Disable | |||||
Port Number | 1 to 65535 (110) | |||||
Port Number (SSL) | 1 to 65535 (995) | |||||
Connection Time Out Time | 30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.) | |||||
Cert. Verification Level | ||||||
Expiration date | Confirm, Do Not Confirm | |||||
CN | Confirm, Do Not Confirm | |||||
Key Usage | Confirm, Do Not Confirm | |||||
Chain | Confirm, Do Not Confirm | |||||
Revocation Checking | Confirm, Do Not Confirm | |||||
11 TCP Socket Setting | ||||||
TCP Socket Setting | ||||||
TCP Socket Setting | Enable, Disable | |||||
Port Number | 1 to 65535 (59158) | |||||
SSL Setting | Enable, Disable | |||||
Port Number (SSL) | 1 to 65535 (59159) | |||||
TCP Socket (ASCII Mode) | ||||||
TCP Socket (ASCII Mode) | Enable, Disable | |||||
Port Number (ASCII Mode) | 1024 to 65535 (59160) | |||||
12 OpenAPI Setting | ||||||
<OpenAPI Setting> | ||||||
OpenAPI Setting | Enable, Disable | |||||
SSL Setting | SSL/Non SSL, SSL Only, Non-SSL Only | |||||
Auth | ||||||
Auth | Enable, Disable | |||||
Login Name | Up to 8 one-byte characters can be used. | |||||
Password | Up to 8 one-byte characters can be used. | |||||
Port Number | 1 to 65535 (50001) | |||||
Port Number (SSL) | 1 to 65535 (50003) | |||||
Cert. Verification Level | ||||||
Client Cert. | Requesting, Not requesting | |||||
Expiration date | Confirm, Do Not Confirm | |||||
CN | Confirm, Do Not Confirm | |||||
Key Usage | Confirm, Do Not Confirm | |||||
Chain | Confirm, Do Not Confirm | |||||
Revocation Checking | Confirm, Do Not Confirm | |||||
13 Web Service Setting | ||||||
Web Service Settings | ||||||
Friendly Name | KM + last 6 digits of MAC Address Up to 62 one-byte characters can be used. | |||||
SSL Setting | Enable, Disable | |||||
Print Setting | ||||||
Print Setting | Enable, Disable | |||||
Printer Name | KM + last 6 digits of MAC Address Up to 63 one-byte characters can be used. | |||||
Printer Location | Up to 63 one-byte characters can be used. | |||||
Printer Information | Up to 63 one-byte characters can be used. | |||||
Web Service Extension Setting | ||||||
Proxy 1 to 3 | Enable, Disable | |||||
SSL Setting | Enable, Disable | |||||
Host Name | IPv4 Change, IPv6 Change, Host Name Change | |||||
Port Number | 1 to 65535 (80) | |||||
File Path | Set value: Up to 255 one-byte characters can be used. | |||||
Scan Settings | ||||||
Scan Settings | Enable, Disable | |||||
Scanner Name | KM + last 6 digits of MAC Address Up to 63 one-byte characters can be used. | |||||
Scanner Location | Up to 63 one-byte characters can be used. | |||||
Scanner Information | Up to 63 one-byte characters can be used. | |||||
14 JSP Setting | ||||||
<JSP Setting> | ||||||
JSP Setting | Enable, Disable | |||||
SSL Setting | Enable, Disable | |||||
Auth | ||||||
Auth | Enable, Disable | |||||
Login Name | Unknown Up to 8 one-byte characters can be used. | |||||
Password | change it Up to 8 one-byte characters can be used. | |||||
Port Number | 30081 to 30090 (30081) | |||||
Port Number (SSL) | 30081 to 30090 (30082) | |||||
15 LDAP Setting | ||||||
<LDAP Setting> | ||||||
LDAP Setting | ||||||
LDAP Setting | Enable, Disable | |||||
Maximum Search Results | 5 to 100 (100) | |||||
Connection Time Out Time | 5 to 300 (60) (sec.) | |||||
LDAP Server Register | ||||||
LDAP Server Address | IPv4 Change 0.0.0.0 (0 to 255) IPv6 Change 0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes) Host Name Change Up to 253 one-byte characters can be used. *8 | |||||
Search Base | Up to 255 one-byte characters can be used. | |||||
SSL Setting | Enable, Disable | |||||
Port Number | 1 to 65536 (389) | |||||
Port Number (SSL) | 1 to 65536 (636) | |||||
Cert. Verification Level | ||||||
Expiration date | Confirm, Do Not Confirm | |||||
CN | Confirm, Do Not Confirm | |||||
Key Usage | Confirm, Do Not Confirm | |||||
Chain | Confirm, Do Not Confirm | |||||
Revocation Checking | Confirm, Do Not Confirm | |||||
Authentication Method | Anonymous, Simple, Digest-MD5, GSS-SPNEGO, NTML v1, NTML v2 | |||||
Server Auth. Method Select | Current Setting, Dynamic Auth. | |||||
Login Name | Up to 255 one-byte characters can be used. | |||||
Password | Up to 128 one-byte characters can be used. | |||||
Domain Name | Up to 64 one-byte characters can be used. | |||||
Referral Setting | Use, Not Use | |||||
Check Connection | Start | |||||
16 IEEE802.1X Authentication Setting | ||||||
Authentication Status | ||||||
IEEE802.1X Authentication Setting | Enable, Disable | |||||
Supplicant Setting | * Supplicant Setting is performed on Administrator Setting of PageScope Web Connection. | |||||
Cert. Verification Level | ||||||
Expiration date | Confirm, Do Not Confirm | |||||
CN | Confirm, Do Not Confirm | |||||
Chain | Confirm, Do Not Confirm | |||||
17 Hot Folder Setting | ||||||
Hot Folder Setting | ||||||
Hot Folder Function | Enable, Disable | |||||
ON (MFP) | Synchronize, Not Synchronize | |||||
Print Order | File Copy Start Order, File Copy Completion Order | |||||
User Setting | Register, Edit, Delete | |||||
No. | 001 to 999 | |||||
User Name | Up to 20 one-byte characters can be used. | |||||
Password | Up to 20 one-byte characters can be used. | |||||
Folder Setting | Register, Edit, Delete | |||||
Password | Up to 20 one-byte characters can be used. | |||||
No. | 001 to 999 | |||||
Public | Enable, Disable | |||||
Folder Name | Up to 80 one-byte characters can be used. | |||||
Output Method | Print, Hold, Print & Hold | |||||
Delete Printed File | Delete, Save | |||||
Auth | Guest, Registered User, arbitrary setting | |||||
Print Setting Priority | Each Job's Print Setting, Hot Folder's Print Setting | |||||
Print Setting | 01 PCL 02 Paper Tray Setting 03 Output Tray Setting 04 Simplex/Duplex 05 Bind Direction 06 Staple 07 Punch 08 Fold/Trimming 09 Offset 10 Output Setting 11 Order 12 Sets 13 Sort/Group 14 Paper Size 15 Orientation 16 Banner Option 17 Banner Tray 18 Convert Paper Size 19 Combine Originals/Image Repeat 20 Booklet 21 Adhesive Binding 22 Image Position 23 Pile Permission 24 Resolution 25 Feed Way 26 Colored Paper 27 Paper Type 28 Full Bleed | |||||
Delete All Printed Files | Yes, No | |||||
18 Detail Setting | ||||||
<Detail Setting> | ||||||
Device Setting | ||||||
MAC Address | ||||||
Network Speed | Auto Setting, 10Mbps Half Duplex, 10Mbps Full Duplex, 100Mbps Half Duplex, 100Mbps Full Duplex | |||||
<Detail Setting/Time Adjustment Setting> | ||||||
NTP Setting | Enable, Disable | |||||
NTP Server Address | ||||||
Auto NTP Server Address | Enable, Disable | |||||
NTP Server Address | IPv4 Change 0.0.0.0 (0 to 255) IPv6 Change 0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes) Host Name Change Up to 253 one-byte characters can be used. *8 | |||||
Port Number | 1 to 65535 (123) | |||||
Auto Time Adjustment | Use, Not Use | |||||
Polling Interval | 1 to 240 (24) (hrs) | |||||
<Status Notification/Alert E-mail> | ||||||
Group | 1 to 5 (1) | |||||
Alert E-mail Setting | Enable, Disable | |||||
Trans E-mail Address | Up to 250 one-byte characters can be used. | |||||
Trans Items | Service Call, Dispose of Trim Scrap Box, Waste Toner Box Full, Toner Supply, Finisher Tray Full, Dispose of Punch Scrap Box, Replenish Paper Tray, Exchange Trim Receiver, Staple Cartridge Supply, Humidifier Tank Supply, JAM, Glue Pellet Supply, PM Call, Dispose of Staple Scrap Box, Out of Bind parts, HDD(Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | |||||
<Status Notification/SNMP Trap> | ||||||
Group | 1 to 5 (1) | |||||
Trans Setting | Enable, Disable | |||||
Trans Address | IPv4 Change 0.0.0.0 (0 to 255) IPv6 Change 0: 0: 0: 0: 0: 0: 0: 0 Host Name Change Up to 253 one-byte characters can be used. | |||||
Trans Port No. | 1 to 65535 (162) | |||||
Trans Community Name | public Up to 15 one-byte characters can be used. | |||||
Trans Items | Service Call, JAM, Replenish Paper Tray, Toner Supply, PM Call, Staple Cartridge Supply, Finisher Tray Full, Dispose of Punch Scrap Box, Dispose of Trim Scrap Box, Glue Pellet Supply, Exchange Trim Receiver, Waste Toner Box Full, Dispose of Staple Scrap Box, Humidifier Tank Supply, Out of Bind parts, HDD(Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | |||||
Trans Setting | Enable, Disable | |||||
Trans IPX Network Address | 00: 00: 00: 00 | |||||
Trans IPX Node Address | 00: 00: 00: 00: 00: 00 | |||||
Trans IPX Community Name | public Up to 15 one-byte characters can be used. | |||||
Trans Items | Service Call, JAM, Replenish Paper Tray, Toner Supply, PM Call, Staple Cartridge Supply, Finisher Tray Full, Dispose of Punch Scrap Box, Dispose of Trim Scrap Box, Glue Pellet Supply, Exchange Trim Receiver, Waste Toner Box Full, Dispose of Staple Scrap Box, Humidifier Tank Supply, Out of Bind parts, HDD(Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | |||||
PING Confirmation | ||||||
PING Send Address | IPv4 Change 0.0.0.0 (0 to 255) IPv6 Change 0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes) Host Name Change Up to 253 one-byte characters can be used. *8 Check Connection | |||||
Check Connection | Start | |||||
LPD Setting | Enable, Disable | |||||
SLP Setting | Enable, Disable | |||||
LLTD Setting | Enable, Disable | |||||
SSDP Setting | Enable, Disable | |||||
Cert. Verifi. Settings | ON, OFF | |||||
Use SSL Version | SSL3.0, TLS1.0, TLS1.1, TLS1.2 | |||||
AD Auth. LDAP over SSL | Enable, Disable | |||||
AD Auth. LDAP over SSL Port Number | 1 to 65536 (636) | |||||
Network Setting Clear | Network Setting Clear, Start |
*1: | Select [Auto Setting] to make "DHCP Setting," "BOOTP Setting," "ARP/PING Setting," and "AUTO IP Setting" available. However, changing the selection from [Auto Setting] to [Direct Setting] invalidates the settings made for "DHCP Setting" and "BOOTP Setting." Also, changing from [Direct Setting] to [Auto Setting] validates the settings made for "DHCP Setting," "BOOTP Setting," "ARP/PING Setting," and "AUTO IP Setting." |
*2: | Selecting [Disable] for "IPv6 Setting" disables this function, even if [Enable] is selected for "IPv6 Auto Setting." In PageScope Web Connection, the drop-down list of "IPv6 Auto Setting" appears dimmed to show inactivity. |
*3: | Selecting [Disable] for "IPv6 Auto Setting" enables the setting change of "Global Address," "Prefix Length," and "Gateway Address." |
*4: | Unavailable for the ranges from fe80: : to febf: ffff: ffff: ffff: ffff: ffff: ffff: ffff, and from ff00: : to ffff: ffff: ffff: ffff: ffff: ffff: ffff: ffff. |
*5: | XXXX will be calculated from the MAC address. |
*6: | Unavailable only for the range from fe80: 0: 0: 0: : to fe80: 0: 0: 0: ffff: ffff: ffff: ffff. |
*7: | When using Scan to SMB on Mac OS X 10.7 or 10.8, be sure to select the setting including "NTLMv2". |
*8: | The characters between periods should be 63 one-byte characters at maximum. Use periods to connect the character strings, to make the enter up to 251 (253 including host name) one-byte characters. |
*9: | Cannot access PageScope Web Connection if set to [Disable]. |
*10: | Only one IP address, not a range, can be permitted/denied in three ways. For example, to permit/deny 192.168.11.22 only, enter: 192.168.11.22 - 0.0.0.0 0.0.0.0 - 192.168.11.22 192.168.11.22 - 192.168.11.22 |
*11: | "Discovery User Name" cannot be specified with the same entry as that for "Read User Name" or "Write User Name." |