Home Settings and AdjustmentsInfo. Sound Item Setting: Setting the Info. Sound for Each Item

Info. Sound Item Setting: Setting the Info. Sound for Each Item

Specify the repeat count of Info. Sound or Voice that sounds when a job stops due to paper misfeed or paper out, and also specify whether or not to enable the sound individually for given items.

  1. Follow the procedure on User Setting to display the [User Setting Menu] screen.

  2. Press [System Setting] on the [User Setting Menu] screen, and then press [Operation/Info. Sound Setting] and [Info. Sound Item Setting] in sequence.

  3. Select the desired repeat count for Info. Sound and Voice respectively, using the keys provided under [Repeat Number Setting].

  4. Set the information sound for machine stoppage item by item, using the keys provided under [Notice Set for Machine Stop].

    • To enable the information sound, select the desired sound type. Press [Check] to check the selected sound.

    • Press [OFF] to disable the information sound.

  5. Press [Next] in the lower left corner of the screen to continue the setting.

    • The [Job Complete Pre-notice] provided under [Other Notification Setting] allows you to specify whether or not to use the expected job completion time for information sound. Press [Detail Setting], then select the desired time. Press [OK] to complete the setting and return to the previous screen.

    • Setting keys of [For Sample Printing] are displayed on the screen when the machine is mounted with Image Controller IC-602.

  6. Press [OK] to complete the setting.

    • To cancel the change, press [Cancel]. In either case, the screen returns to the [Operation/Info. Sound Setting Menu] screen.