Execute Adjust Operation: Executing Adjustment Operations
Execute adjustment operations of [Gamma Automatic Adjustment], [Color Registration Auto Adj.], [Toner Refresh Mode], [Fusing Refresh Mode], [Drum Refresh Mode], and [Lubrication Brush Refresh Mode].
Key | Function |
|---|---|
[Gamma Automatic Adj.] | Make this adjustment when color reproduction of the whole output is no good. |
[Color Registration Adj.] | Make this adjustment when a gap occurs in heap of YMC between original and output on consecutive print. |
[Toner Refresh Mode] | Make this adjustment for following phenomena. Rough image Random small point Small white circle |
[Fusing Refresh Mode] | Use this function if, after switching to a larger sheet size, an outline of the previously fed sheet size appears on the image. Repeated use of the refresh operation may cause thin, glossy lines to appear on the image. |
[Drum Refresh Mode]/[Lubrication Brush Refresh Mode] | Use this function when vertical lines appear on the image. Select all three adjustment functions, including [Gamma Automatic Adj.]. |
These six adjustments are the same as those of [Adjustment] - [Execute Adjust Operation], accessed from the [MACHINE] screen.
Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.
Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Expert Adjustment] and [Execute Adjust Operation] in sequence.
The [Execute Adjust Operation] screen is displayed.
Select the desired item for adjustment.
Multiple selections are available.
Press [OK], then press [Exit [UTILITY]] on the [Expert Adjustment Menu] screen. After exiting the [UTILITY] screen, the machine starts the adjustment operation.
To cancel the change, press [Cancel]. The screen returns to the [Expert Adjustment Menu] screen.