Home ApplicationSpecify Color Conversion Settings

Specify Color Conversion Settings

Specify the Color Conversion setting to use as default for the Color Configuration you create.

  1. From the tree view on the [Color Configuration Management] screen, double-click the color configuration that you wish to display the detail information.

    The details are displayed on the right side of the screen.

  2. Click [Setting] in the Color Conversion Option Settings at the bottom of the detail information fields.

    [Color Conversion Setttings] screen is displayed.

  3. Select the setting of Pure Black from [Pure Black].

  4. To use gray replacement, select from [Gray Replacement (RGB)] and [Gray Replacement (CMYK)].

  5. To use black overprint, check [Black Overprint].

  6. Select the setting of Composite Overprint from [Composite Overprint].

  7. To use embedded RGB profile, check [Use Embedded RGB Profile].

  8. To use embedded CMYK profile, check [Use Embedded CMYK Profile].

  9. To activate output intent of PDF/X, select [PDF/X output intent].

  10. To use spot color, check [Use Spot Color].

  11. To execute alternative color conversion, check [Use Alternative Color Conversion].

  12. To use the RGB simulation, check [RGB Simulation].

  13. To use tone curve adjustment, select an option from [Tone Curve Adjustment].

    • When individual adjustment of tone curve is enabled, set [Tone Curve (Image)] and [Tone Curve (Text/Graphic)].

  14. If necessary, enter the description to [Memo].

  15. Click [OK] and return to [Color Configuration Management] screen.