Home
ApplicationColor Centro : Application of Image Controller IC-602 for color managementSpot ColorOperate on the Spot Color ScreenReset the Screen
ApplicationColor Centro : Application of Image Controller IC-602 for color managementSpot ColorOperate on the Spot Color ScreenReset the ScreenApplication
- Color Centro : Application of Image Controller IC-602 for color management
- Overview of Color Centro
- Set up Color Centro
- Basic Information of Color Centro
- Color Management with Color Centro
- Calibration
- Calibration Manager Screen
- Operate on the Calibration Manager Screen
- Selection of a Calibration Method
- Select a Colorimeter
- Check the Calibration Status
- Set the Paper Type and Screen
- Execute Calibration
- Measure the Calibration Accuracy
- Calibration with Exact Color
- Executing G7 Calibration
- Specify Groupings
- Export Calibration Data
- Import Calibration Data
- Reset the Calibration Data
- Tone Curve Adjustment
- Tone Curve Adjustment Screen
- Operate on the Tone Curve Adjustmen Screen
- Spot Color
- Spot Color Screen
- Operate on the Spot Color Screen
- Load of a Spot Color Table
- Create a Spot Color Table
- Selection and Addition of a Spot Color
- Add a Spot Color that is Measured by using a Colorimeter
- Adjust a Spot Color Manually
- Adjust a Spot Color by using a Printed Chart
- Save a Spot Color Table
- Change the Priority of a Spot Color Table
- Management of Spot Color Tables
- Management of Spot Colors
- Search for a Spot Color
- Reset the Screen
- Alternative Color
- Profile Management
- Profile Management Screen
- Management of RGB Source Profiles
- Management of CMYK Target Profiles
- Creation of a CMYK Target Profile
- Management of Printer Profiles
- Creation of a Printer Profile
- Management of RGB-CMYK Device Link Profiles
- Creation of an RGB-CMYK Device Link Profile
- Editing of an RGB-CMYK Device Link Profile
- Management of CMYK-CMYK Device Link Profiles
- Creation of a CMYK-CMYK Device Link Profile
- Editing a CMYK-CMYK Device Link Profile
- Color Default Settings
- Color Configuration Management
- Profile Set
- Color Configuration
- Color Configuration Management Screen
- Create a Color Configuration
- Edit a Color Configuration
- Register a Color Configuration
- Management of Color Configurations
- Creation of a Profile Set
- Editing a Profile that compose a Profile Set
- Improve the Accuracy of a Profile Set
- Adjustment of Color Conversion of a Profile Set
- Management of Profile Sets
- Specify Environment on Color Centro Profiler
- Other Functions
- Troubleshooting
Reset the Screen
The loaded spot color table and the result of spot color adjustment displayed on the [Spot Color] screen remain, until the time when screen is closed or reset.
This section describes how to initialize [Spot Color] screen and how to erase the loaded information and the result of adjustment, without saving.
Select the spot color to initialize from the list of [Spot Color].
From the [File] menu, select [Initialize].
The [Initialization Check] message is displayed.
Click [OK].
The result of adjustment is erased from the screen.