Home
ApplicationColor Centro : Application of Image Controller IC-602 for color managementColor Default SettingsOperate on the Color Default Settings ScreenDefault Manual Settings
ApplicationColor Centro : Application of Image Controller IC-602 for color managementColor Default SettingsOperate on the Color Default Settings ScreenDefault Manual SettingsApplication
- Color Centro : Application of Image Controller IC-602 for color management
- Overview of Color Centro
- Set up Color Centro
- Basic Information of Color Centro
- Color Management with Color Centro
- Calibration
- Calibration Manager Screen
- Operate on the Calibration Manager Screen
- Selection of a Calibration Method
- Select a Colorimeter
- Check the Calibration Status
- Set the Paper Type and Screen
- Execute Calibration
- Measure the Calibration Accuracy
- Calibration with Exact Color
- Executing G7 Calibration
- Specify Groupings
- Export Calibration Data
- Import Calibration Data
- Reset the Calibration Data
- Tone Curve Adjustment
- Tone Curve Adjustment Screen
- Operate on the Tone Curve Adjustmen Screen
- Spot Color
- Spot Color Screen
- Operate on the Spot Color Screen
- Load of a Spot Color Table
- Create a Spot Color Table
- Selection and Addition of a Spot Color
- Add a Spot Color that is Measured by using a Colorimeter
- Adjust a Spot Color Manually
- Adjust a Spot Color by using a Printed Chart
- Save a Spot Color Table
- Change the Priority of a Spot Color Table
- Management of Spot Color Tables
- Management of Spot Colors
- Search for a Spot Color
- Reset the Screen
- Alternative Color
- Profile Management
- Profile Management Screen
- Management of RGB Source Profiles
- Management of CMYK Target Profiles
- Creation of a CMYK Target Profile
- Management of Printer Profiles
- Creation of a Printer Profile
- Management of RGB-CMYK Device Link Profiles
- Creation of an RGB-CMYK Device Link Profile
- Editing of an RGB-CMYK Device Link Profile
- Management of CMYK-CMYK Device Link Profiles
- Creation of a CMYK-CMYK Device Link Profile
- Editing a CMYK-CMYK Device Link Profile
- Color Default Settings
- Color Configuration Management
- Profile Set
- Color Configuration
- Color Configuration Management Screen
- Create a Color Configuration
- Edit a Color Configuration
- Register a Color Configuration
- Management of Color Configurations
- Creation of a Profile Set
- Editing a Profile that compose a Profile Set
- Improve the Accuracy of a Profile Set
- Adjustment of Color Conversion of a Profile Set
- Management of Profile Sets
- Specify Environment on Color Centro Profiler
- Other Functions
- Troubleshooting
Default Manual Settings
This section describes how to set the Color Default Settings of the image controller manually.
The color default settings are made on the screens displayed on each of the 4 tabs.
For details, refer to each of the following pages.