Home ApplicationRegister to the Image Controller

Register to the Image Controller

You can registerĀ an RGB source profile in [Local], [My Documents], or [Network] to the image controller.

  1. Click [RGB Source Profile] on [Profile Management] screen.

    • Similar operation can be done by selecting, on the [File] menu, [Profile Type] - [RGB Source Profile].

  2. Select the places from [Local], [My Documents] or [Network] of the tree format, where the RGB source profiles are saved.

    The list appears according to the selection.

  3. Select an RGB source profile from the list.

  4. Click [Import].

    The [Import] screen is displayed.

    • When you select the multiple RGB source profiles, [Import] is not available.

    • When a folder other than [Controller] is selected on the tree view, [Import] is not available.

    • Similar operation can be done when you select [File] menu - [Import].

  5. Enter [Saved Name] and [Memo].
    Up to 31 one-byte characters can be entered to [Saved Name]. Up to 64 one-byte characters (32 two-byte characters) can be entered to [Memo].

    • You cannot save the RGB source profile of the same name with those in the image controller.

  6. Click [Import].

    The RGB source profile is registered in the image controller.

    [Import] screen is closed to return to [Profile Management] screen.