Home ApplicationSettings of the Image Controller

Settings of the Image Controller

Configure the network settings for the image controller.

[TCP/IP Setting]

Specify the IP address on this machine.

- NIC Setting: Setting the Machine Network Information

- Controller NIC Setting Menu: Configuring the Network Information of the Controller

- TCP/IP Setting

[JSP Setting]

Specify [JSP Setting] to [Enable], and [Authentication Setting] to [Disable].

  • The initial port number is "30081" No configuration is required under the normal condition.

- NIC Setting: Setting the Machine Network Information
- Controller NIC Setting Menu: Configuring the Network Information of the Controller
- JSP Setting