Change the Information

You can change the information of the saved RGB source profile.

1. Click [RGB Source Profile] on [Profile Management] screen.

   • Similar operation can be done by selecting, on the [File] menu, [Profile Type] - [RGB Source Profile].

2. From the tree view and the list, select the RGB source profile to change the information.

   • For details about how to connect another controller, refer to Switch the Image Controller to Connect.

   • When you reload the information of the image controller connected currently, select [File] menu - [Reload].

3. Click [Change Table Information].

   The [Change Table Information] screen is displayed.

   • When you select the multiple RGB source profiles, [Change Table Information] is not available.

   • Similar operation can be done when you select [File] menu - [Change Table Information].

   • If the profile name is marked with an asterisk, you cannot change the profile's information.

4. If necessary, enter [Saved Name] and [Memo].
   Up to 31 one-byte characters can be entered to [Saved Name]. Up to 64 one-byte characters (32 two-byte characters) can be entered to [Memo].

   • However, you cannot change the information of the RGB source profile which was registered at factory shipping.

5. Click [OK].

   The RGB source profile information is changed.