Web Utilities (the Machine)
Overview
This section describes how to access Web Utilities of the machine.
Tips
- For details about the network setting, contact the network administrator.
Procedure
1
Launch your browser.
2
Enter the following URL into the address bar and press [Enter].
http://<IP address of the machine>:30091
Example: If the IP address of the machine is 192.168.1.20, "http://192.168.1.20:30091".If the Image Controller manufactured by EFI or Creo is mounted, type "http://<IP address of the machine>/". For details about the Image Controller, refer to [Types of Image Controller] in [Specifications].
Example: If the IP address of the machine is 192.168.1.20, "http://192.168.1.20/".You can also access from Web Connection. For details, refer to Login Screen or Login Screen.
3
This displays the [Main Page] screen of the machine's Web Utilities.
4
Click [Machine Manager Setting] if using the administrator settings menu.
A dialog box for entering your password is displayed.
5
Enter "admin" for the Username and the (8-digit) administrator password for the password. Click [OK]. The username is fixed with "admin" and cannot be changed.
[Machine Manager Setting] screen is displayed.
Tips
- For details about the default administrator password, refer to [About the Administrator Password]. If you cannot log in using the default password, contact the administrator.
- If [SSL Setting] is enabled, the URL changes to "https://<IP address of the machine>:30092".
in the upper-right of a page, it turns into 
and is registered as a bookmark.