Replenishing Staples
Overview
If the staples in the saddle stitcher or finisher run out, the following messages is displayed in the on-screen information display area.
The [Consumable and Scrap Indicators] staple display lights up red and the text color changes to yellow.
Option | Message |
|---|---|
| [Pull out staple finisher stacker then, set staples in stapler] |
[Pull out staple finisher saddle unit then, set staples in stapler] | |
SaddleStitcher SD-506 | [Please add staples to the saddle stitcher left side stapler] |
[Please add staples to the saddle stitcher right side stapler] | |
Saddle Stitcher SD-513 | [Please add staples to the saddle stitcher stapler] |
Check the message and replenish the relevant stapler with staples.
Procedure
1
Press [Staple Cartridge] in [Consumable and Scrap Indicators].
2
Press [,] or [+] to display the procedure, and then confirm it to perform processing accordingly.
Reference
- For details about how to display the procedure, refer to Replenishing/Disposal Method Help Messages.
in the upper-right of a page, it turns into 
and is registered as a bookmark.