Interfaces Used for Connections
Connect the printer cable to applicable port of the Image Controller.
Backside of the system
No. | Name | Description |
|---|---|---|
1 | Network port (1000Base-T / 100Base-TX / 10Base-T) | Use when using a network connection. The protocol is compatible with TCP/IP (LPD/LPR and SMB). |
2 | Service port (USB2.0 Type B e 1) | Use when using a USB connection. Can be connected on Windows PC. Local Interface Kit EK-612 and USB cable are required for connection. Use any of the following USB cables.
|
in the upper-right of a page, it turns into 
and is registered as a bookmark.