Power Save Function

[Auto Low Power]

Turns off the Touch panel display to reduce the power consumption of this system. To enable this function, set to [Auto Low Power] in [Power Save Function].

Functions under the following conditions.

• The system is in a print-ready state, but a certain amount of time has elapsed during which nothing has been printed

• The Power Save of the Control panel is pressed for at least one second

For details, refer to [Power Save Function Setting].

[Auto Shut OFF]

Turns off all lamps except those of the Power Save and the Power LED of the Control panel to reduce the power consumption of this system. To enable this function, set to [Auto Shut OFF] in [Power Save Function].

Functions under the following conditions.

• The system is in a print-ready state, but a certain amount of time has elapsed during which nothing has been printed

• The Power Save of the Control panel is pressed for at least one second

It may take some time for the system to warm-up if restarting it after being in the shut-off state for a long period.

For details, refer to [Power Save Function Setting].

[ErP Setting]

If a certain amount of time has elapsed with the Sub power switch off or with the system in Auto Low Power or Auto Shut Off modes, turn the Main power switch off.

You can set the amount of time that needs to pass until the power-saving function starts working.

If [Weekly Timer ON/OFF Setting] is set to [Weekly Timer ON], you cannot to set this function.

For details, refer to [Weekly Timer ON/OFF Setting].

[Mono Energy-save Mode]

You can print in monochrome when in Energy-Saving Mode.

[Weekly Timer Setting]

The power of system automatically turns ON/OFF according to set dates and times.