Configuring Paper Information Settings for Trays
Overview
Configure paper information settings (size, type, weight, etc.) for paper loaded to the paper feed tray on the [Paper Setting] screen.
The size of the paper is automatically recognized if the loaded paper is a standard size.
When the loaded paper is custom-size paper, manually configure the settings.
Tips
- This section describes the basic procedure. For details about each setting item, refer to [Paper Setting].
Procedure
1
Press [Paper Setting] on the [MACHINE] screen.
You can also configure the setting by pressing [Paper Setting] of [COPY].
2
Select the paper feed tray to which the paper is loaded and press [Change Set].
3
Press [Paper Type] and select a paper type.
4
Press [Paper Size].
5
Select either [Standard], [Custom] or [Tab Paper] according to the type of paper loaded to the tray.
6
Configure the size settings.
[Standard]: Recognizes automatically. You can select the size to be detected using [Detect Size Setting].
[Custom]: Set the paper trimming amount of widthwise, lengthwise, and cover (only for Fold & Staple and Multi Half Fold). You can register configured sizes using [Size Registration] and recall registered sizes using [Size Recall].
[Tab Paper]: Configure the paper size and number of tab papers.
7
Press [OK].
Saves the settings and moves to the previous screen.
8
Configure other items as and when required.
9
Press [OK].
Saves the settings and moves to the previous screen.
10
Press [Close].
Return to the [MACHINE] screen or [COPY] screen to complete the settings.
in the upper-right of a page, it turns into 
and is registered as a bookmark.