Manually install the PPD Driver, or PCL Driver on Windows.
The following connection methods can be used.
LPR
Port 9100
SMB
USB
This section describes network connections (Port 9100 printing) which use TCP/IP. For details about other available connection methods, refer to [Network / Security].
The following settings must be configured before installation.
Select the printer with IP address if using an LPR/Port 9100 connection.
Select the "\\NetBIOS Name\Print Service Name" printer if SMB connection is used. The NetBIOS name can be viewed in [SMB Server Settings] of Web Connection. The print service name is set to "print" by default.
For using an SMB connection, click [OK] on the [Connect to Printer] screen which is displayed after clicking [Next].
It may take some time before all printers can be found. If you fail to search for the printer, refer to Procedure (Installation When the Printer Is Not Found).
Click either [Continue] or [Yes] if the screen related to [User Account Control] is displayed.
If you cannot find the printer by searching for it, create a new port.
The [Add a printer] wizard is displayed.
For LPR/Port 9100 connection, select [Standard TCP/IP Port].
For SMB connection, select [Local Port].
For LPR/Port 9100 connection, select [TCP/IP Device], and enter the IP address of Image Controller.
For SMB connection, enter "\\NetBIOS Name\Print Service Name" into the [Port Name] box. The NetBIOS name can be viewed in [SMB Server Settings] of Web Connection. The print service name is set to "print" by default.
If the [Additional Port Information Required] or [More Port Information Required] screen is displayed, proceed to step 9.
If the [Install the printer driver] screen is displayed, proceed to step 11.
For LPR connection, add a check in [LPR] and enter [Print] into the [Queue Name:] box.
Enter in upper case and lower case accordingly.
To use Port 9100, select the [Raw] check box, and enter the RAW port number ([9100] by default) into the [Port Number] box.
The [Install the printer driver] screen is displayed.
PPD Driver is stored in [PS] - [PS_PPD_Driver] - [EN].
PCL Driver is stored in [PCL] - [PCL_Driver] - [Drivers] - [PCL] - [EN].
If your computer is 64 bit, select [Win_x64]. If it is 32 bit, select [Win_x86].
For details about how to download the printer driver, refer to Downloading the Printer Driver.
Click either [Continue] or [Yes] if the screen related to [User Account Control] is displayed.