Scanning
Overview
This section describes the basic operating procedure for scanning.
NOTICE
- The scan function is available on a product equipped with a scanner and HDD.
Tips
- The following procedures are overview of the operating procedures. For specific operations, follow the respective operation procedures.
Reference
- For details about scanning, refer to[SCAN].
Procedure
1
Select the scan function you want to use on the [SCAN] screen.
2
Select the destination where the scanned data will be sent and press [Scan Settings].
3
Configure scan conditions.
4
Position the original.
5
Press Start on the Control panel.
6
The scanning will begin and the scan data will be sent.
in the upper-right of a page, it turns into 
and is registered as a bookmark.