Loading Tab Paper Into the Large Capacity Unit LU-202m
Overview
Load tab paper into the Large Capacity Unit LU-202m.
Example: Insert 3 sheets of tab paper into 1 print set
Tray Loading Direction | How to Stack the Tab Paper | Print Set |
|---|---|---|
 |  |  |
A: Back side B: Front side | A: Side printed or to be printed B: 1st tab paper C: 2nd tab paper D: 3rd tab paper | A: 1st tab paper B: 2nd tab paper C: 3rd tab paper D: 1-copy print set |
Example: Insert 3 sheets of tab paper into 3 print sets (total 9 sheets)
Tray Loading Direction | How to Stack the Tab Paper | Print Set |
|---|---|---|
 |  |  |
A: Back side B: Front side | A: Side printed or to be printed B: 1st tab paper C: 2nd tab paper D: 3rd tab paper | A: 1st tab paper B: 2nd tab paper C: 3rd tab paper D: 3-copy print set |
Tips
- There is a possibility that sheets of paper may stick together due to punch holes if tab paper with punch holes is used. To prevent multiple sheets being fed at once, flick through the stack by hand before loading the paper. For details about how to separate paper, refer to Paper Management.
- When loading tab paper into any tray, change the size setting of the tray to tab paper in Paper Setting. For details, refer to [Paper Size].
Procedure
1
Set [Paper Size] of Large Capacity Unit LU-202m to [Tab Paper] in [Paper Setting].
2
Open the Top door.
3
Load the tab paper.
A: Back side, B: Front side
When repositioning the Side guides and Rear guide plate, refer to Loading Paper Into the Large Capacity Unit LU-202m.
4
Press the Tray bottom plate lowering button and Tray bottom plate will go down.
5
Close the Top door.
in the upper-right of a page, it turns into 
and is registered as a bookmark.