Installation (Windows)
Overview
Install Color Centro on Windows.
Color Centro is included with the Image Controller. The downloading method is the same as the printer driver. For details about how to download, refer to Downloading the Printer Driver.
NOTICE
The following settings must be configured before installation.
- Set the IP address of the Image Controller.
Tips
- The network cable connects to the Network port of the Image Controller. For details, refer to Interfaces Used for Connections.
Reference
- For details about the supported operating systems, refer to Color Centro.
Procedure
1
Double-click setup.exe of Color Centro that is downloaded.
Click either [Allow], [Continue], or [Yes] if the screen related to [User Account Control] is displayed.
The language selection screen is displayed.
2
Select the desired language in the menu list, and click [OK] to start the installer.
Follow the on-screen instructions to install software.
3
Click [Next].
The [License Agreement] screen is displayed.
4
Check the content, select [I accept the terms in the license agreement], and click [Next].
You cannot perform the installation if you do not agree.
You can change the display language of the license agreement from the menu list.
5
Select the folder to install software, and click [Next].
Click [Change] to change the installation destination.
6
Click [Install].
7
Click [Finish].
Read me for Color Centro is also installed at the same time.
in the upper-right of a page, it turns into 
and is registered as a bookmark.