In order to prevent sheets from sticking together, take each sheet from the stack individually and load the required number. Also, if the paper has been loaded for a long period of time, remove and reload each sheet before printing.
Load the paper so that it is placed against the left side of the tray. If paper is not properly set until the end, the paper may become curled and may cause problems in the feed mechanism, which in turn can cause paper jams.
This section describes the procedure using an example figure in which the Banner Paper Tray Unit MK-760 is attached to Multi Bypass Tray MB-509. When using Multi Bypass Tray MB-508, also follow the same procedure to load paper.
1
Load banner paper into the Banner Paper Tray Unit MK-760 with the print side facing up.
2
Align the Side guides of the Bypass tray with the banner paper.
Bookmarks
If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.
Filter by title
Filter by title
You can narrow the search range from the menu for this user's guide. Multiple choices are possible.