JOB LIST | [Combine]

[Combine]

Select multiple jobs from the job list of [Hold Job], and combine them as a single job.

The combine method can also be chosen.

NOTICE

If [Output Setting] or [Application Setting] is not provided for the top one of the combined jobs, the settings of all jobs are canceled.

Tips

Only [Hold Job] is targeted for Combine.
Jobs on the HDD are combined after they are recalled as hold jobs. For details, refer to [Recall] (In the Lower Right Corner of the Screen).
If the setting of the source hold job is changed, the changed contents are not applied to the combined hold job.
Up to 499 jobs can be combined.
Up to 10,000 pages can be stored in a single job.

Press [Multi-Sel.], and select a job to combine from the job list of [Hold Job].

Press [Up] or [Down] to sort jobs in the combination order.

Press [Combine].

The combination method selection screen is displayed.

Select a combination method.

[Image Only]: Inherits only the image of the selected job in order to combine jobs.
[Image + Paper]: Inherits the image and paper profile of the selected job in order to combine jobs.
[Image+Paper+Output]: Inherits the image, paper profile, and post-processing setting of the selected job to combine jobs.
[Chapters]: Press [ON] to divide the combined jobs into chapters.

Press [OK] to combine the selected jobs and store them as a new job.

The file name of the head job is used for the file name of the combined jobs.
The operation after combination varies as shown below depending on the combination method and the setting of the head job.

Job setting	Combination method	Head job output setting/application setting	Operation
[Output Setting]	[Image Only] [Image + Paper]	Punch	The setting of the head job is applied to all the combined jobs.
		Multi-Fold (Fold & Staple, Multi Half Fold, Multi Tri-Fold)
		Z-Fold	The setting of the last page in the head job is applied to all of the second and subsequent combined jobs.
		Staple
	[Image+Paper+Output]	Punch	The setting of the head job is applied to all the combined jobs.
		Multi-Fold (Fold & Staple, Multi Half Fold, Multi Tri-Fold)	The settings of all jobs are canceled.
		Z-Fold	The setting of each job is held.
		Staple	The setting of each job is held.
[Application Setting]	[Image Only] [Image + Paper] [Image+Paper+Output]	Combine / Image Repeat / Booklet / Adhesive Binding / Image Centering / Binding Margin / Stamp	The setting of the head job is applied to all the combined jobs.
[Application Setting]	[Image Only] [Image + Paper] [Image+Paper+Output]	Others	The settings of all jobs are canceled.