[PB Fine Adjustment]
Overview
Set the lead edge position, trimming amount, and image position for the cover of perfect binding.
The print position and trimming amount can be fine-adjusted.
NOTICE
- The optional Perfect Binder PB-503 is required to use this function.
NOTICE
The following setting is required to use this function.
- Set [Output Setting] to [Perfect Bind] when holding a job
Setting Items
Setting item | Description | |
|---|---|---|
[Cover Lead Edge Adj.] | Sets the horizontal position of the front cover and body. Pressing this key displays the numeric value entry field. Range: -20.0 mm to 5.0 mm | |
[Cover Trimming Adj.] | Sets the cover trimming amount. Pressing this key displays the numeric value entry field. Range: -5.0 mm to 5.0 mm | |
[Cover Image Shift Adj.] | [Front] | Sets the position of the image to print on the cover. Selecting the print side ([Front] or [Back]) and shift direction ([Up/Down] or [Right/Left]) displays the numeric value entry field. Range: -10.0 mm to 10.0 mm (Up-right arrow: + direction, Down-left arrow: - direction) |
[Back] | ||
[Up/Down] | ||
[Right/Left] | ||
Keypad | Used to enter numeric values. | |
[,] / [+] | Increases or decreases the numeric value in increments of 0.1 mm. | |
[+ / -] | Sets the plus or minus of the numeric value. | |
in the upper-right of a page, it turns into 
and is registered as a bookmark.