[Output Tray]
Overview
Select an output tray.
You can also select a sheet to apply the setting to.
NOTICE
- Each output tray has a capacity limit. Be careful not to exceed the limit, otherwise unexpected problems may occur.
NOTICE
- When using the Bundle exit tray of SaddleStitcher SD-506, be sure to set up the stand under the tray.
- Never push the tray to its original position while the stand of the Bundle exit tray of SaddleStitcher SD-506 remains set up.
Tips
The displayed output tray varies depending on models or optional devices mounted on this system.
- When Large Capacity Stacker LS-507 is mounted, [Pile Set] is displayed.
- When 2 units of Large Capacity Stacker LS-507 are mounted, [Stacker Auto] is displayed.
- When Bundle exit tray of SaddleStitcher SD-506 is selected, withdraw the tray.
Setting Items
Setting item | Description |
|---|---|
 Output tray selection key | Select the output tray from the front view of the machine. The selected output tray key is highlighted. |
[Valid Object] | Select a sheet to reflect the setting on. For details, refer to Setting Procedure (Setting [Valid Object]). |
in the upper-right of a page, it turns into 
and is registered as a bookmark.