[Stamp Numbering]
Overview
Print a numbering (sequence numbers) that is not provided on the original.
This function allows you to set the character format, color, and print position.
Setting Items
Setting item | Description | |
|---|---|---|
[Format] | [Format] selection key | Set the stamp format. |
[Text Size] | [Text Size] selection key | Set the font size of the stamp. |
[Color] | [Color] selection key | Set the stamp character color. |
[Start Number] | [Start No. Set] | Set the start number of numbering (serial number). You can enter up to 4 digits for the number. Range: 0 to 9999 |
[Print Pos. Set] | [Fine Adjustment] | Enter the numeric value to set the annotation printing position. Select one of the 9 frames on the [Print Pos. Set] display as the print position, and then use [Fine Adjustment] to adjust the position. |
[Outside Print] | Prints numbering (sequential numbers) outside the left/right opening. This item is available when [Booklet] or [Adhesive Binding] is selected. | |
[Function OFF] | Turns the function off while maintaining the set information. | |
Setting Procedure (Setting the Start Number)
Set the start number of numbering (serial number).
1
Press [Start No. Set].
The setting screen is displayed.
2
Use the on-screen keypad to enter the numeric value.
Range: 0 to 9999
Pressing [,]/[+] increases or decreases the numeric value by 1.
3
Press [OK].
Setting Procedure (Setting the Print Position)
Set the stamp printing position.
1
Press [Fine Adjustment].
The setting screen is displayed.
2
Select the key of the desired direction.
The entry field is displayed.
3
Use the on-screen keypad to enter the numeric value.
Pressing [,]/[+] increases or decreases the numeric value by 1.
4
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.