[Face]

Set the direction of the front face to output to the output tray.

Setting to [Face Up] outputs a job to the output tray with the front face up, so you can immediately check the output result.

Tips

• For 2-sided printing, set the output face based on the front face.
• If [Order] is set to [N to 1], [Face] is automatically set to [Face Up].
• The front face is automatically set depending on the function selected in [Output Setting], so it cannot be changed in some cases.
• When Trimmer Unit TU-510 is mounted, a job may not be output with the specified output face depending on conditions. For details, refer to "Precautions on Output Face" in Trimmer Unit TU-510.

Reference

• For details about [Order], refer to [Order].