Set job finishing conditions.
Screen access
Touch panel - [JOB LIST] - [Hold Job] - [Job Ticket] - [Job Ticket Edit]
Touch panel - [JOB LIST] - [Hold Job] - [Page Edit] - [Job Ticket Edit]
Setting item | Description |
---|---|
Sets the bind direction for 2-sided printing. | |
Set the sorting method when outputting a hold job. | |
Set the direction of the front face to output to the output tray. | |
Set the order to output to the output tray. | |
Specify whether to allow the next job to pile up on top of the previous job in the stacker when printing multiple jobs successively. | |
Set the print side of [Fold]. | |
Check the perfect binding setting, or fine-adjust various settings. | |
Set the width of the spine of the perfect binding. | |
Set the lead edge position, trimming amount, and image position for the cover of perfect binding. | |
Configure settings to crease only the perfect binding covers. | |
Configure settings to automatically output unnecessary tab paper to the output tray. | |
Configure this setting when performing separation output. | |
Configure settings to slit both edges of paper. The slitting amount can also be set. | |
Set paper trimming functions such as Four Edge Trim or Multiple Cutting. | |
Configure settings to crease the paper. | |
Configure settings to use an external finisher. |