Set the paper size for printing.
You can also select a sheet to apply the setting to.
Setting item | Description | |
---|---|---|
[Size Type] | [Standard] | Sets a standard paper size. |
[Custom] | Sets a custom paper size. | |
[Tab Paper] | Sets a tab paper size. | |
[Valid Object] | Set a sheet to reflect the setting on. For details, refer to Setting Procedure (Setting [Valid Object]). |
Range: [(1)Vertical]: 100 mm to 330.2 mm, [(2)Horizontal]: 148 mm to 487.7 mm
Pressing [,]/[+] increases or decreases the numeric value in steps of 0.1 mm.
To use the custom size registered in this system, press [Size Recall]. For details, refer to Setting Procedure (Setting the Custom Paper Size).
Default: 5
Range: 1 to 15
Pressing [,]/[+] increases or decreases the numeric value by 1.
Set a sheet to reflect the setting on. Some settings are fixed, so they may not be changeable.
[Current Sheet]: Applies the setting only to the currently selected sheet.
[Specify Sheet]: Applies the setting to the selected sheet.
[All Sheets]: Applies the setting to all the sheets.
If you select [Current Sheet] for a multi-page job that has sheets with the same Paper tray or paper conditions, a confirmation dialog box may be displayed. Select the reflection destination from the following options.
To select a continuous sheet, set the range using a hyphen (-) (example: 2-5). To select multiple sheets, delimit them using a comma (,) (example: 2,4,6).
To move the cursor position, press [*]/[)].
Pressing [Del] deletes a character if the cursor is on the character, or deletes the previous text 1 character at a time if the cursor is not on a character.