[Sort/Group]
Overview
Set the sorting method when outputting a hold job.
This function is convenient when you print multiple documents because they are delimited by the specified number of sheets or number of sets.
NOTICE
One of the following options is required to use this function.
- Large Capacity Stacker LS-507
- Finisher FS-532
- Output Tray OT-512
Tips
The output destination, offset method, and settable number of sets vary depending on the optional devices mounted on this system. For details, refer to the following.
Setting Items
Setting item | Description |
|---|---|
[Offset Sort] | Outputs (offset output) prints in the same page order as the original by the specified number of sets while delimiting them for each set. You can set the number of sets or number of sheets to offset. |
[Sort] | Sequentially outputs prints in the same page order as the original by the specified number of sets. Offset output is not performed. |
[Offset Group] | Prints the original for each page by the specified number of sets, and outputs (offset output) prints while delimiting them for each original. You can set the number of sets or number of sheets to offset. |
[Group] | Prints the original for each page by the specified number of sets, and outputs prints in the original order. Offset output is not performed. |
Setting Procedure
Set the offset output.
1
Select [Offset Sort] or [Offset Group].
The setting screen is displayed.
2
Specify the number of sheets or the number of copies to be separated at the time of output.
[By Set Numbers]: Outputs separately for each specified number of copies.
[By Set Sheet]: Outputs separately for each specified number of output sheets.
[By 1Set+Set Sheet]: Set 2 types of separation timings. The specified number of output sheets are output separately for each copy.
3
Use the on-screen keypad to enter the numeric value.
Range: 1 to 9,999
To clear the numeric value, press [C].
4
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.